Setup
After the gateway and sensors are physically installed and powered, the remaining setup configures how the gateway connects to your network and how it is accessed for administration.
This section covers the facility-network and access configuration of the gateway. The sensor subnet itself uses fixed addressing and needs no configuration (see the Gateway overview for the sensor network details).
- LAN Configuration — connect the gateway to your facility network with DHCP or a static IP.
- Wi-Fi Configuration — optionally connect the gateway over wireless instead of, or in addition to, wired Ethernet.
- SSH Access — enable and secure remote shell access for administration.
The sensor subnet is physically isolated from the facility LAN via the fiber optic link; the settings here apply only to the facility-facing interface.